WHEEL ARCHES
- Fibreglass wheel arch set to fit SER 3L/R. Will not fit station wagon type vehicles. Short wheel base only.
- Product Code: BA019
SIDE MOULDINGS
- One kit suitable for 88/90 Landrover. No drilling required. Helps protect your door and vehicle side. For 109/110 use BA202/A.
- Product Code: BA202
- Product Code: BA202A
RADIATOR MUFFS
- BA27: Rad Muff for SER 2A.
- BA27A: Rad Muff for SER 1 and SER 2.
- BA28: Rad Muff for SER 3.
- BA2004: Rad Muff for 90/110 and V8.
- All feature a two position for adjustable flap.
- Product Code: BA27
- Product Code: BA27A
- Product Code: BA28
- Product Code: BA2004
MUD FLAPS
- BR204: Rear mud flaps for SER 2A and SER 3.
- BR1015: Front mud flaps for SER 2A and SER 3.
- BR3248: Rear mud flaps for 90/110.
- Product Code: BR204
- Product Code: BR1015
- Product Code: BR3248
MIRRORS
- BA071: For 7"x 5" plain.
- BA072: For 10"x 7" plain.
- BA073: For Split view mirror specially for towing.
- BR1918: For 90/110 Door mirrors with arms.
- Product Code: BA071
- Product Code: BA072
- Product Code: BA073
- Product Code: BR1918
WHITE 8 SPOKE WHEELS
- BA014: 6.00 x 16 white 8 spoke.
- BA015: 7.00 x 16 white 8 spoke.
- Pressed steel, white enamel 8 spoke wheels with blue/red pinstripe.
- Product Code: BA014
- Product Code: BA015
Diff Guard
- Fits all Land Rover Axles except Salisbury Type
- Land Rover S 1, 2, 2A & 3 - 90/110 & Defender, Range Rover & Discovery
- Don't forget your diffs! These are the lowest, most exposed points on the underside of your Rover. These diff guards will not affect your ground clearance at all. constructed of 3/16" and 1/8" steel and powder coated. Land Rover outer axle housing tubes are very thick and hard to damage, but the centre of the diff has a 1/16" pressed steel plate which can be damaged if not protected . Usually damaging the diff gears inside . Diff guards mount in minutes with only one fixing bolt .
- Protects the axle case at its most vulnerable point !
Product Code : GAL049
Gas Shock Absorbers
IRONMAN RESPONSE
- Nitrogen Gas Charged
- Control Response System Valving
- Polyurethane Mounting Bushes
- Hardened & Chromed 14mm Piston Rod
- Tough Twin Tube Construction with Reinforced Double Arc Welded Mountings
- 35mm Piston Bore
- Premium high performance oil with viscosity additives
- 2 Year World Wide Warranty
- Also see our range of Ironman Suspension Kits
- Product code (State Vehicle Model when ordering)
Gas Shock Absorbers
EXPLORER PRO COMP
- Nitrogen Gas Charged
- 10 Stage Velocity Sensitive Valving
- 5/8" Chrome Hardened Piston Rod
- Unique Teflon Wiper Seal
- Nylon Banded Piston seal
- Pro Comp All Weather Fluid
- Expanded Reserve Tube
- Product code (State Vehicle Model when ordering)
Standard Window
- Black Metal Frames
- 4mm Clear Toughened Glass
- Pre Drilled Frames for Easy Fitting
- Flap Over Lock as Standard
- Corner Radii 3"
- 36" x 15"
- 41 1/2 x 16 1/2 Available on request
Deluxe Concealed Fixing Windows
- Black Metal Frames
- 5mm Clear Toughened Glass
- Pre Drilled Frames for easy Fitting
- Concealed Section to Hide Fixing Screws
- Slam Lock fitted for Extra Security
- Corner Radii 3"
- 36" x 15"
- 41 1/2 x 16 1/2 Available on request
- Standard Product Code :WINDOWSTD
- Deluxe Product Code :WINDOWDLX
Ironman Suspension Kits
- from The Australian Bush
- Totally Integrated Suspension Systems
- Full Product warranty World Wide
Coil Springs
- Shot Peened to increase spring life
- Heavy Duty Hi Lift for increased load and rate capacity
Shock Absorbers
- Long Travel for off road use
- State of the art Response Gas Technology that virtually eliminates fade
- 14mm Hardened Chrome Piston rod
- Polyurethane Mounting Bushes
- Exclusive all weather seal
- 35mm Piston
- Premium high performance oil with viscosity additives
- Reinforced double arc welded shock eye mountings for maximum security and durability
- Urethane Spring and Shackle Bushes ........Control Arm bushes for coil spring vehicles
- Highest quality O-E Urethane raw material
- Provides more response handling and lower maintenance
- Longer life than standard rubber bushings
- Improves stability and initial turn in
Leaf Springs
- Shot Peened to increase spring life
- Military wrapped to ensure maximum safety
- Diamond cut finish to prevent wear through friction
- Hi lift springs available in both Heavy Duty and Comfort Ride
- Designed to raise vehicle approximately 50mm - 75mm above standard height
U Bolts
- Highest quality cold formed , incorporating rolled threads with deep nuts
- Rust preventative coating
- P O A
FLAT FOLD DOWN BAR
- Type: Steel 14 Gauge 2 x 90 degree bends each side.
- Tube Diameter: 1.5" (37mm) tube.
- Tube Diameter: Top rail only 1.25" (31mm).
- Weight: 25kgs.
- Coating: Black Nylon.
- Construction: Tubular construction MIG Welded onto ridged central frame. Flame cut profiles with steel wraparound and centre folded plate.
- Special Features: Integral lamp guards, fold down load carrying position, with hinged bumper fixings.
- To fit Models: Series 1 86", 2 , 2a ,3 and 90/110-Defender
- Product Code: BA006
EXTERIOR SUN VISOR
- Type: Aluminium Sun Visor
- Construction: Aluminium folded visor with steel/plated brackets.
- Features: Supplied as a complete kit ready for installation, all fixtures and fittings plated. Visor supplied in bright finish. Suitable for spraying to match colour of vehicle.
- To Fit: SER 2, 2A and 3 Vehicles.
- Product Code: BA131
ROLL CAGES
- Type: BA2005 -Standard Roll Bar (Body mounted).
- BA2006 - Competition Type Roll Bar. (Chassis Mounted).
- Construction: Tubular in 2" (50mm) with 3.2mm wall thickness. MIG welded with heavy mounting plates.
- Fixing: BA2005 - Bolted onto cappings.
- BA2006 - Welded to Chassis.
- Product Code: BA2005 - Will fit Truck Cab & Soft top vehicles
- Product Code: BA2006 - Will fit Hard Top and Soft Top vehicles
SUMP GUARDS
- Heavy duty guard for that extra protection off road.
- Aluminium with steel brackets for easy fixing.
- Product Code: BA083
Deluxe Sump Guard
- Aliuminuim heavy duty deluxe sump and steering Guard
- Product Code: GAL047